6.5mm Wire Rope Grips DIN1142
After many years we found a top quality manufacturer of reliable wire rope grips, manufactured to the industrial standard DIN1142
Wire rope grips have a host of nick names and may also be known as wire rope clamps or dog clamps.
They are typically used to create a loop at the end of a piece if wire to clamp it to another wire, or to suspend a product such as a feeder of drinker. The clamp consists of a U-Bolt with a Saddle secured by two nuts.
What wire rope can I secure with these 5mm clamps?
6.5mm Grips are used to join 5mm wire rope to 5mm wire rope. In a Poultry shed they are used to secure the centre loops to the main cable.
Can I secure 5mm wire to 3mm wire?
We would recommend to go down a size and use 5mm wire rope grips, see code 28050.
How do I use rope grips?
- Ideally 3 grips per join should be used
- The U-bolt must always be placed on the load bearing side of the joint to avoid crushing the rope
- Tighten the rope grip before the rope is put under tension
- After load has been applied tighten the grips further to ensure maximum grip
- Grips should be spaced 5 to 6 times the rope diameter, for example space the 25 to 30mm apart on 5mm wire rope
What is the size of the nut on these 6.5mm grips?
The nut is 10mm, we have a nut spinner which is ideal for the job if you are just doing a few, see item 44010. We also have a range of JCB and Hyundai power tools should your task be a little bigger.
